U mona:
PVC-O Pipe Extrusion Line-High Speed
Botsa
●Ka ho otlolla phala ea PVC-U e hlahisoang ke extrusion ka litsela tse peli tsa axial le radial, liketane tse telele tsa molek'hule tsa PVC ka pipe li hlophisitsoe ka tsela e hlophisehileng ea biaxial, e le hore strenath, toughness le ho hanyetsa ha pipe ea PVC e ka ntlafatsoa. Ts'ebetso ea ho otla ka litebele, ho hanyetsa mokhathala, le ho hanyetsa mocheso o tlase ho ntlafalitsoe haholo. Ts'ebetso ea thepa e ncha ea phala (PVC-0) e fumanoeng ke ts'ebetso ena e feta haholo ea phala e tloaelehileng ea PVC-U.
●Liphuputso li bontšitse hore ha li bapisoa le liphaephe tsa PVC-U, liphaephe tsa PVC-O li ka boloka lisebelisoa tse tala haholo, tsa fokotsa litšenyehelo, tsa ntlafatsa ts'ebetso ea liphaephe ka kakaretso, 'me tsa theola litšenyehelo tsa ho haha le ho kenya liphaephe.
Papiso ea Boitsebiso
Pakeng tsa liphaephe tsa PVC-O le mefuta e meng ea liphaephe
●Chate e thathamisa mefuta e 4 e fapaneng ea liphaephe (ka tlase ho 400mm bophara), e leng liphaephe tse entsoeng ka tšepe, lipeipi tsa HDPE, lipeipi tsa PVC-U le lipeipi tsa PVC-O 400 tsa grade. Ho ka bonoa ho data ea kerafo hore litšenyehelo tsa thepa ea liphaephe tsa tšepe le liphaephe tsa HDPE ke tse phahameng ka ho fetisisa, tseo ha e le hantle li tšoanang. Boima ba yuniti ea pipe ea castiron K9 ke e kholo ka ho fetisisa, e fetang makhetlo a 6 ho feta ea pipe ea PVC-O, e bolelang hore lipalangoang, kaho le ho kenya li na le mathata a mangata, liphaephe tsa PVC-O, le thepa e tlaase ka ho fetisisa e theko e tlaase, e fokolang ka ho fetisisa, e theko e tlaase ka ho fetisisa. ea thepa e tala e ka hlahisa liphaephe tse telele.
Physical Index Parameters le Mehlala ea liphaephe tsa PVC-O
| Che. | Ntho | Ntho | Ntho |
| 1 | Boima ba lipeipi | Kg/m3 | 1,350~1,460 |
| 2 | PVC palo polymerization degree | k | > 64 |
| 3 | Matla a nako e telele | Mpa | ≥48 |
| 4 | Matla a longitudinal tensile ea phala ea matla ke 58MPa, 'me tataiso e ka holimo ke 65MPa. | Mpa | |
| 5 | Circumferential tensile matla, 400/450/500 kereiti | Mpa | |
| 6 | Ho thata ha lebopo, 20 ℃ | HA | 81-85 |
| 7 | Vicat softening mocheso | ℃ | ≥80 |
| 8 | Thermal conductivity | Kcal/mh°C | 0.14~0.18 |
| 9 | Matla a dielectric | Kv/mm | 20-40 |
| 10 | Mocheso o khethehileng, 20 ℃ | cal/g℃ | 0.20~0.28 |
| 11 | Dielectric kamehla, 60Hz | C^2(N*M^2) | 3.2~3.6 |
| 12 | Ho hanyetsa, 20°C | Ω/cm | ≥1016 |
| 13 | Feleng roughness value(ka) | mm | 0.007 |
| 14 | Bokhopo bo felletseng(Ra) | Ra | 150 |
| 15 | Lesale la ho tiisa phala | ||
| 16 | R port socket ho tiisa lesale le thata | IRHD | 60±5 |
Chate ea papiso ea hydraulic curve ea pipe ea polasetiki
Maemo a bohlokoa bakeng sa liphaephe tsa PVC-O
Tekheniki Parameter
Papiso ea data lipakeng tsa mela e tloaelehileng le ea lebelo le holimo
Lintlha tse ntlafalitsoeng
●Extruder e kholo e sebelisana le Krauss Maffei, e nang le sistimi ea taolo ea SIEMENS-ET200SP-CPU le enjene e kholo ea Jeremane BAUMULLER.
●E kenyelelitsoe marang-rang a marang-rang a ho lekanya botenya ba ultrasonic ho lekola botenya ba phala ea preform ka nako ea nnete, ka potlako le ka nepo ho thusa ho lokisa botenya ba phala ea preform ea OPVC.
●Sebopeho sa hlooho ea die le hlobo ea ho atolosa se ntlafatsoa ho lumellana le litlhoko tsa tlhahiso ea lebelo le phahameng.
●Litanka tsohle tsa mela li entsoe ka sebopeho sa maraba a mabeli ho laola ka nepo mocheso oa phala ea preform.
●Ho eketsoa ho fafatsa ka ho fafatsa le ho futhumatsa moea o chesang ho ntlafatsa bokhoni ba ho futhumatsa.
Kenyelletso ea lisebelisoa tse ling tse ka sehloohong tsa mohala kaofela
Mokhoa oa ho hlahisa PVC-O Pipe
Setšoantšo se latelang se bontša kamano pakeng tsa mocheso oa PVC-O le ts'ebetso ea pipe:
Palo e ka tlase ke kamano pakeng tsa karo-karolelano ea PVC-O le ts'ebetso ea liphaephe: (bakeng sa ho bua feela)
Tlhahiso ea ho Qetela
Customer Cases
Tlaleho ea Kamohelo ea Bareki
